Tomasz X.
Project Director/manager, Project Quality Manager
Last Updated: Jan 15, 2020
Address
Category
E-mail
Phone Number
Education
Naval Architecture and Offshore Engineering
Experience
1. OT INDUSTRIES (MOL Group) ,Project Director, 2018
The construction of a high- pressure natural gas pipeline from Lwówek to Odolanów of a diameter of 1000 mm, an operating pressure of 8.4 MPa and a length of 168 km. The part of North- South Gas Corridor, which will connect the LNG Terminal in Świnoujście with the Baltic Pipe, through central Poland, the Czech Republic, Slovakia and Hungary with the proposed Adria LNG terminal in Croatia.
The investment has been divided into two stages:
• Stage I covers the connection of the Lwówek, Kotowo and Krobia nodes (about 114 km).
• Stage II covers the connection of Krobia and Odolanów nodes (about 54 km).
The contractor for the construction works of the first stage of the investment is the Consortium of PORR Polska Infrastructure S.A. and O.T. Industries- KVV Contractor CO. LTD.
A project of Community interest
In October 2013, the European Commission awarded the investment status as "Project of Common Interest".
2. DNV Korea Ltd. (DNV GL SHI Shipyard South Korea) , Project Manager / Senior Surveyor / IVB / PED Branch expert, 2012- 2017
Projects:
1. Total E&P - Martin Linge Production Platform Topside Project (SHI hull no.7115) - PED Certification and Verification (IVB)
2. 96K Type Drillships for PDC (SHI hull no.2015/2057/2075) - offshore classification
3. 96K Type Drillships for Ocean Rig (SHI hull no.1979/2013) - offshore classification
Very well experienced as Project Manager, Risk Manager, Troubleshooter and Coordinator of design as well as classification process.Very well experienced as Supervisor of construction process from design, classification and quality point of view. Managing all technical, statutory and quality aspects of many classification orders with regards to new building projects, as well as fleet in service. (MODU, SOLAS, MARPOL, Load Line, US Coast Guard Regulations, national shelf regulations, EN ISO and NORSOK standards, etc.)
Coordinating, directly supervising and instructing the subcontractors.
Performing Welder’s Qualification Tests followed by certification in accordance with recognized standards (ex.EN ISO 9606).
Witnessing development and confirming WPSs, in acc.with the statutory requirements and project specification.Performing commissioning, technical expertise, operation tests & certification.
Monitoring and advising on the performance of the quality management system, producing data and reports which were measured against set standards. Advising on changes and how to implement them whilst providing training, tools and techniques to enable others to achieve quality standards.
Updating and maintaning of all documented systems and procedures, including the Project Quality Plan. Ensuring all project processes are compliant with the statutory requirements and project specification.
Planning and monitoring internal and external audits in accordance with the statutory requirements and project specification, providing feedback to implement improvement.
Ensuring the management of the NCR issues and follow- ups, quality alerting and Root & Cause Analysis to prevent re- occurrence of the problems.
Performing Independent Third Party Verification, commissioning, technical expertise, operation tests and certification on board of the offshore installations.
3. Germanischer Lloyd SE (DSME Shipyard, South Korea), Project Manager / Senior Surveyor / Team Leader / Surveyor’s Coach, 2005- 2012
The Germanischer Lloyd SE is a classification society based in the city of Hamburg, Germany. As a technical supervisory organization Germanischer Lloyd conducts safety surveys on more than 7,000 ships with over 100 Mio GT.Its technical and engineering services also include the mitigation of risks and assurance of technical compliance for oil, gas and industrial installations as well as wind energy parks.
Most important projects:
"Santa Ursula" (IMO no.9430387)2011- 05, 2012- 03
Container carrier 7800 TEU
"Santa Rita" (IMO no.9425382)2010- 03, 2011- 05
Container carrier 7154 TEU
"Cap Isabel" (IMO no.9484558)2009- 06, 2010- 03
Container carrier 4600 TEU
"Cap Ines" (IMO no.9484546) 2009- 03, 2010- 01
Container carrier 4600 TEU
"MSC Danit" (IMO no.9404649)2008- 10, 2009- 03
Container carrier 14000 TEU
"CMA CGM Vela" (IMO no.9354923)2008- 06, 2008- 10
Container carrier 11040 TEU
"Rio de Janeiro" (IMO no.9357963)2007- 06, 2008- 06
Container carrier 5905 TEU
4. Private business (shipbuilding design), CEO, Project/Design Engineer, 2002- 2005
Large projects for:
- Meyer Werft, Papenburg, Germany
- Lloyd’s Werft, Bremerhaven, Germany
- Szczecin Shipyard SA, Poland
5. Stocznia Szczecinska SA (Szczecin Shipyard), Poland, Project/Design Engineer, 1998- 2001
Design of Engine Room, from conceptual project to final workshop documentation (detailed design), including all of the aspects of front- end engineering, classification and manufacturing process.
The construction of a high- pressure natural gas pipeline from Lwówek to Odolanów of a diameter of 1000 mm, an operating pressure of 8.4 MPa and a length of 168 km. The part of North- South Gas Corridor, which will connect the LNG Terminal in Świnoujście with the Baltic Pipe, through central Poland, the Czech Republic, Slovakia and Hungary with the proposed Adria LNG terminal in Croatia.
The investment has been divided into two stages:
• Stage I covers the connection of the Lwówek, Kotowo and Krobia nodes (about 114 km).
• Stage II covers the connection of Krobia and Odolanów nodes (about 54 km).
The contractor for the construction works of the first stage of the investment is the Consortium of PORR Polska Infrastructure S.A. and O.T. Industries- KVV Contractor CO. LTD.
A project of Community interest
In October 2013, the European Commission awarded the investment status as "Project of Common Interest".
2. DNV Korea Ltd. (DNV GL SHI Shipyard South Korea) , Project Manager / Senior Surveyor / IVB / PED Branch expert, 2012- 2017
Projects:
1. Total E&P - Martin Linge Production Platform Topside Project (SHI hull no.7115) - PED Certification and Verification (IVB)
2. 96K Type Drillships for PDC (SHI hull no.2015/2057/2075) - offshore classification
3. 96K Type Drillships for Ocean Rig (SHI hull no.1979/2013) - offshore classification
Very well experienced as Project Manager, Risk Manager, Troubleshooter and Coordinator of design as well as classification process.Very well experienced as Supervisor of construction process from design, classification and quality point of view. Managing all technical, statutory and quality aspects of many classification orders with regards to new building projects, as well as fleet in service. (MODU, SOLAS, MARPOL, Load Line, US Coast Guard Regulations, national shelf regulations, EN ISO and NORSOK standards, etc.)
Coordinating, directly supervising and instructing the subcontractors.
Performing Welder’s Qualification Tests followed by certification in accordance with recognized standards (ex.EN ISO 9606).
Witnessing development and confirming WPSs, in acc.with the statutory requirements and project specification.Performing commissioning, technical expertise, operation tests & certification.
Monitoring and advising on the performance of the quality management system, producing data and reports which were measured against set standards. Advising on changes and how to implement them whilst providing training, tools and techniques to enable others to achieve quality standards.
Updating and maintaning of all documented systems and procedures, including the Project Quality Plan. Ensuring all project processes are compliant with the statutory requirements and project specification.
Planning and monitoring internal and external audits in accordance with the statutory requirements and project specification, providing feedback to implement improvement.
Ensuring the management of the NCR issues and follow- ups, quality alerting and Root & Cause Analysis to prevent re- occurrence of the problems.
Performing Independent Third Party Verification, commissioning, technical expertise, operation tests and certification on board of the offshore installations.
3. Germanischer Lloyd SE (DSME Shipyard, South Korea), Project Manager / Senior Surveyor / Team Leader / Surveyor’s Coach, 2005- 2012
The Germanischer Lloyd SE is a classification society based in the city of Hamburg, Germany. As a technical supervisory organization Germanischer Lloyd conducts safety surveys on more than 7,000 ships with over 100 Mio GT.Its technical and engineering services also include the mitigation of risks and assurance of technical compliance for oil, gas and industrial installations as well as wind energy parks.
Most important projects:
"Santa Ursula" (IMO no.9430387)2011- 05, 2012- 03
Container carrier 7800 TEU
"Santa Rita" (IMO no.9425382)2010- 03, 2011- 05
Container carrier 7154 TEU
"Cap Isabel" (IMO no.9484558)2009- 06, 2010- 03
Container carrier 4600 TEU
"Cap Ines" (IMO no.9484546) 2009- 03, 2010- 01
Container carrier 4600 TEU
"MSC Danit" (IMO no.9404649)2008- 10, 2009- 03
Container carrier 14000 TEU
"CMA CGM Vela" (IMO no.9354923)2008- 06, 2008- 10
Container carrier 11040 TEU
"Rio de Janeiro" (IMO no.9357963)2007- 06, 2008- 06
Container carrier 5905 TEU
4. Private business (shipbuilding design), CEO, Project/Design Engineer, 2002- 2005
Large projects for:
- Meyer Werft, Papenburg, Germany
- Lloyd’s Werft, Bremerhaven, Germany
- Szczecin Shipyard SA, Poland
5. Stocznia Szczecinska SA (Szczecin Shipyard), Poland, Project/Design Engineer, 1998- 2001
Design of Engine Room, from conceptual project to final workshop documentation (detailed design), including all of the aspects of front- end engineering, classification and manufacturing process.