Hoa X.
Sr.mechanical Engineer
Last Updated: Jun 19, 2018
Address
Category
E-mail
Phone Number
Education
Bachelor of Machine Manufacture Mechanical Engineer at Ho Chi Minh City University of Technical Education- Vietnam, 5 years (1995 – 2000) .
Experience
EMPLOYMENT SUMMARY
2017 – PresentRepsol (Talisman Vietnam 07/03 B.V.).Senior Mechanical Engineer
2015 – 2016Yinson production Pte. Ltd., Malaysia.Mechanical Completion
2011 – 2012Hoang Long Joint Operating CompanyPiping & mechanical Engineer
2014 – 2015
2012 – 2014Technip Geoproduction (M) Sdn Bhd.Senior Mechanical Engineer
2009 – 2012PTSC Mechanical & Construction Company Ltd.Piping and Mechanical Design Lead Engineer
2008 – 2009Zealtech Corporation (in Seoul city, Korea)Semiconductor and LCD design Engineer
2004 – 2008Kotobuki- Sea (Japanese Company)Chief of first Public seating design section
2000 – 2004Gulliver co., ltd (Japanese Company)Mould Design Engineer
From 2017 to presentProject title : Repsol (Talisman Vietnam 07/03 B.V.)
Client : Repsol petroleum corporation
Position : Mechanical Engineer
- Job description :
• Assisted with defining the requirements and design of rotating equipment, piping interfaces, materials selection requirements, equipment layouts, interfaces with pumps, pressure vessels, heat exchangers, packaged equipment etc. for the development and ensuring correct implementation during the design, fabrication, installation and commissioning phases of offshore facilities including TLWP and FPSO etc.
• Ensure that all legislative requirements relating to offshore facilities in Vietnam are complied with in respect to the above and are correctly implemented.
• Assisted with implementation of Company Standards, Specifications, Data Sheets and philosophies for mechanical and rotating equipment as per standard code API, ASME, ASTM…ect.
• Reviewed rotating and mechanical equipment specifications, datasheets to be purchased by Contractors for both long- lead and non- long- lead.
• Interface with other engineering disciplines on their requirements and ensure the requirements are incorporated within design and integration of the rotating and mechanical equipment.
• Assisted with establishment and monitoring of technical procedures for inspection and maintenance of rotating and mechanical equipment to ensure their effectiveness and safety in process during fabrication, installation and commissioning phases.
• Oversight of the interfaces between the TLWP Contractor and rotating and mechanical equipment suppliers.
• Witnessed factory acceptance test (FAT) the static & rotating packages.
• Attended pre- award and coordination meetings between equipment suppliers as required.
• Monitored the TLWP Contractor’s engineering, design and progress and highlight problem areas to the TLWP Delivery Manager / CRD Engineering Manager and CRD Project Manager.
From 2015 to 2016
Project title : Ghana OCTP offshore FPSO
Client : ENI exploration & production
Position : Mechanical Completion
- Job description :
• Controlled the installation and Completed check sheet A on all equipment (static & rotating).
• Witnessed the pumps testing and load test handlings as lifting lugs, monorail.etc
• Joined commissioning team, cover all of things related mechanical.
• Managed to third party during testing and commissioning periods.
• Reviewed the documents as “preservation procedure”, “handing load test procedure”, “Commissioning procedure”, “installation procedure”.
• Witnessed the dimension checking at final position of equipment and reviewed dimension report.
• Witnessed factory acceptance test (FAT) the Valves, Pumps, chemical skid.
From 2011 to 2012
2014 to 2015
Project title : Te Giac Trang Field Development Project (Topside H04,H05)
Client : Hoang Long Joint Operating Company, VietNam
Position : Piping and Mechanical Engineer
- Job description :
• Developed specification, datasheet with Contractor for the mechanical equipment (static & rotating).
• Worked as package engineer for pedestal crane, Open and close drain skid, Fuel gas skid, Diesel conditioning skid, Valve,.etc
• Representative client at Crane Vendor’s office (Singapore) to control the design, procurement, fabrication, sub- contractor. It purposes to ensure the progress and quality as per project requirements.
• Reviewed the vendor data, the shop drawings and the testing procedures.
• Joined FAT the mechanical packages, commissioning team at offshore…ect.
• Followed on sub- vendor to do troubleshooting if required.
From 2012 to 2014
Technip Geoproduction(M) SDN BHD
Project title : Nghi Son Refinery, DAP
Client : NSRP Ltd, Vinachem Joint Stock Company
Position : Senior Mechanical Engineer
- Job description :
• Managed to mechanical team following each project.
• Reviewed and controlled all technical documents to be issued by Engineers in team, appraised the team member’s performance.
• Developed specification, datasheet for vessels, tanks, heat exchangers and pumps.
• Made a plan to issue the specifications, data sheets and estimated t
2017 – PresentRepsol (Talisman Vietnam 07/03 B.V.).Senior Mechanical Engineer
2015 – 2016Yinson production Pte. Ltd., Malaysia.Mechanical Completion
2011 – 2012Hoang Long Joint Operating CompanyPiping & mechanical Engineer
2014 – 2015
2012 – 2014Technip Geoproduction (M) Sdn Bhd.Senior Mechanical Engineer
2009 – 2012PTSC Mechanical & Construction Company Ltd.Piping and Mechanical Design Lead Engineer
2008 – 2009Zealtech Corporation (in Seoul city, Korea)Semiconductor and LCD design Engineer
2004 – 2008Kotobuki- Sea (Japanese Company)Chief of first Public seating design section
2000 – 2004Gulliver co., ltd (Japanese Company)Mould Design Engineer
From 2017 to presentProject title : Repsol (Talisman Vietnam 07/03 B.V.)
Client : Repsol petroleum corporation
Position : Mechanical Engineer
- Job description :
• Assisted with defining the requirements and design of rotating equipment, piping interfaces, materials selection requirements, equipment layouts, interfaces with pumps, pressure vessels, heat exchangers, packaged equipment etc. for the development and ensuring correct implementation during the design, fabrication, installation and commissioning phases of offshore facilities including TLWP and FPSO etc.
• Ensure that all legislative requirements relating to offshore facilities in Vietnam are complied with in respect to the above and are correctly implemented.
• Assisted with implementation of Company Standards, Specifications, Data Sheets and philosophies for mechanical and rotating equipment as per standard code API, ASME, ASTM…ect.
• Reviewed rotating and mechanical equipment specifications, datasheets to be purchased by Contractors for both long- lead and non- long- lead.
• Interface with other engineering disciplines on their requirements and ensure the requirements are incorporated within design and integration of the rotating and mechanical equipment.
• Assisted with establishment and monitoring of technical procedures for inspection and maintenance of rotating and mechanical equipment to ensure their effectiveness and safety in process during fabrication, installation and commissioning phases.
• Oversight of the interfaces between the TLWP Contractor and rotating and mechanical equipment suppliers.
• Witnessed factory acceptance test (FAT) the static & rotating packages.
• Attended pre- award and coordination meetings between equipment suppliers as required.
• Monitored the TLWP Contractor’s engineering, design and progress and highlight problem areas to the TLWP Delivery Manager / CRD Engineering Manager and CRD Project Manager.
From 2015 to 2016
Project title : Ghana OCTP offshore FPSO
Client : ENI exploration & production
Position : Mechanical Completion
- Job description :
• Controlled the installation and Completed check sheet A on all equipment (static & rotating).
• Witnessed the pumps testing and load test handlings as lifting lugs, monorail.etc
• Joined commissioning team, cover all of things related mechanical.
• Managed to third party during testing and commissioning periods.
• Reviewed the documents as “preservation procedure”, “handing load test procedure”, “Commissioning procedure”, “installation procedure”.
• Witnessed the dimension checking at final position of equipment and reviewed dimension report.
• Witnessed factory acceptance test (FAT) the Valves, Pumps, chemical skid.
From 2011 to 2012
2014 to 2015
Project title : Te Giac Trang Field Development Project (Topside H04,H05)
Client : Hoang Long Joint Operating Company, VietNam
Position : Piping and Mechanical Engineer
- Job description :
• Developed specification, datasheet with Contractor for the mechanical equipment (static & rotating).
• Worked as package engineer for pedestal crane, Open and close drain skid, Fuel gas skid, Diesel conditioning skid, Valve,.etc
• Representative client at Crane Vendor’s office (Singapore) to control the design, procurement, fabrication, sub- contractor. It purposes to ensure the progress and quality as per project requirements.
• Reviewed the vendor data, the shop drawings and the testing procedures.
• Joined FAT the mechanical packages, commissioning team at offshore…ect.
• Followed on sub- vendor to do troubleshooting if required.
From 2012 to 2014
Technip Geoproduction(M) SDN BHD
Project title : Nghi Son Refinery, DAP
Client : NSRP Ltd, Vinachem Joint Stock Company
Position : Senior Mechanical Engineer
- Job description :
• Managed to mechanical team following each project.
• Reviewed and controlled all technical documents to be issued by Engineers in team, appraised the team member’s performance.
• Developed specification, datasheet for vessels, tanks, heat exchangers and pumps.
• Made a plan to issue the specifications, data sheets and estimated t